Mechanical Calibration

STIC is accredited by NABL for Mechanical Calibration. The Mechanical calibration laboratory is equipped with high accurate E1 class weight, F1 class weights, Precision Balances Dead Weight Tester Pneumatic/Hydraulic Pressure Calibrators, Gauge blocks, Scale & Tape calibration units.

Calibration Capability

Parameter Range
Pressure
Vacuum
0 -1200Kg/cm2
-0.9 – 0 bar
Mass
E1 Class
F1 Class
1mg – 1 kg
1mg – 40 kg
Weighing Balance
E1 Class
F1 Class
0 – 1 kg
0 – 40 kg
Dimension
Volume
Scale & Tape Calibration
Speed
1mm – 500 mm
0-1 lit
0 – 1000 mm
0 – 14000 Rpm
Site Calibration
Weighing balance
Pressure
Vacuum
0 – 40 kg
0 – 600 kg/cm2
0 – 0.9 bar


Mass Calibration

E1 class weights
Traceable weighing results require traceable mass standards. Our E1 class weights satisfy OIML R111 (International organization on legal Metrology) recommendations. The use of appropriate mass weight and their correct treatment at all times is essential to mass metrology. Our E1 class weights have got treaceability to NPL, New Delhi. Their range is from 1 mg to 1kg.

Range: 1mg to 1kg (Stainless steel weights)
Accuracy: E1 class
Traceability: NPL, New Delhi.

F1 class weights
Range: 1mg to 40kg (Stainless steel weights)
Accuracy: F1 class
Traceability: National Standards

Precision Electronic Balance
Make: Sartorius
Range: 1mg to 210g
Resolution: 0.01mg
Traceability: National Standards

Electronic Mass Comparator
Make: Sartorius
Range: 1g to 60kg
Resolution: 1mg
Traceability: National Standard

Pressure Calibration

Dead Weight Tester(DWT)
Dead weight testers are the basic primary standard used for accurate measurement of pressure. No other equipment can match the stability. It is ideal for calibrating pressure gauges, transducers, digital calibrators etc. and can also be used to directly measure the pressure in system and processes when precision reading is important. The calibration Techniques is cross-floating method.

Range 1- 1200kg/cm2
Accuracy 0.0065% of reading
Make: Budenberg
Traceability: National Standards

Pneumatic Pressure Calibrator
Portable calibrators are the powerful range of instrument providing optimum features combination for measurement of pressure at accuracy of 0.025% of FS. A brief description of instrument is given below
Type: Pneumatic Pressure Calibrator
Range: -1 to 20bar
Accuracy: 0.025% of FS
Traceability: National Standard

Hydraulic Pressure Calibrator
Hydraulic Pressure Calibrator The PPS40 has been developed to provide an accurate, portable pressure calibration instrument for use on site or in laboratory/ workshop.
Type: Hydraulic Pressure Calibrator
Range: 0 to 100bar
Accuracy: 0.025% of FS
Traceability: National Standard

Comparison Test Pump & Standard Pressure Gauges
The bourdon type gauges are calibrated by direct comparison method against the reference bourdon gauges depending upon the accuracy and the range of gauges to be calibrated. We have two ranges of reference bourdon gauges.

Type: Standard Pressure gauges
Range: 0 to 100kg/cm2
Make: Budenberg
Accuracy: 0.20% of FS

Type: Standard Pressure gauges
Range: 0 to 600kg/cm2
Make: Budenberg
Accuracy: 0.25% of FS

Dimension Calibration


Gauge Block

Calibration of Vernier Caliper, Micrometer, Screw Gauge, Dial Gauge, Depth Gauge, Height Gauge
Range: 1mm to 500 mm

Scale & Tape Calibration

Calibration of scale and tape
Range : 0 to 1000 mm

Volume Calibration

Calibration of
Volume flask & Cylinder
Pipette & Micro Pipette
Buratee

Speed Calibration

RPM- 0-14000 rpm

Site Calibration

Weighing Balance: 0- 40 kg
Pressure 0- 600 kg/cm2
Vacuum 0 to 0.9 bar

Material Testing

Universal Testing Machine
Universal Testing machine is electromechanical machine with digital display of load & displacement and have system for changing speed. The machine is design for testing various materials like plastics, cable, leather and metals. Tension and compression can be performed on this machine with suitable grip and fixtures.

The main features are

Selection of different speed
Facility to mount different load cells
Facility to mount different grips and fixtures for different test and materials.
Digital display of load and displacement
Storage of important parameters such as peak load, breaking load and max. Displacement.
Facility to return of cross head to home position for next tests.

A brief description f the machine is Make/Model: Unitek 9400
Capacity: 10 tonns with 12mm dia.

Hardness Testing Machine
Hardness is defined as “ Resistance of metals to plastic deformation usually by indentation”. It is a property of a metal, which gives it the ability to resist being permanently deformed (bent, broken or have it shape changed) when load is applied. The greater the hardness of metals the greater the resistance it has to get deformed.

A brief description of the machine is
Type: Vickers cum Brinell hardness testing machine
Make: Techno Instruments
Model: BV 250
Range: 5kg to 250kgf

The main features of the machine is

Testing range is very wide, from soft metals such as lead up to the hardest, like hardened steel.
Thin sheet metals is perfectly tested because the load applied is very small.
Same hardness number is obtained on the same specimen, regardless of load applied.

Fatigue Testing Machine
Fatigue Tests are made with the object of determining the relationship between the stress range and the numbers of times it can be applied before causing failure. Testing machine are used for applying cyclically varying stress. This is a rotating beam type Machine in which load is applied in reverse bending fashion. The standard 8mm dia specimen is held in the specimen holder.

A brief description of the machine is

Type: Fatigue Testing machine
Make: Techno Instruments
Model: FTG-8 (D)
Max. Bending moment: 200kgcm
Testing dia: 8mm

The features of the machine is

Simple lever system of changing load.
The bending moment is applied with a lever system and can easily be changed by moving a weight over the lever.
A digital counter records the total number of revolution at which the specimen fails